to learn more about on semiconductor, please visit our website at www.onsemi.com please note: as part of the fairchild semiconductor integration, some of the fairchild orderable part numbers will need to change in order to meet on semiconductors system requirements. since the on semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the fairchild part numbers will be changed to a dash (-). this document may contain device numbers with an underscore (_). please check the on semiconductor website to verify the updated device numbers. the most current and up-to-date ordering information can be found at www.onsemi.com . please email any questions regarding the system integration to fairchild_questions@onsemi.com . is now part of on semiconductor and the on semiconductor logo are trademarks of semico nductor components industries, llc dba on semiconductor or its subsid iaries in the united states and/or other countries. on semiconductor ow ns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellec tual property. a listing of on semiconductor?s product/patent cover age may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semicon ductor makes no warranty, representation or guarantee regarding the s uitability of its products for any particular purpose, nor does on semico nductor assume any liability arising out of the application or use of any product or circuit, and speci?ca lly disclaims any and all liability, including without limitation spe cial, consequential or incidental damages. buyer is responsible for i ts products and applications using on semiconductor products, including compliance with all laws, regul ations and safety requirements or standards, regardless of any suppor t or applications information provided by on semiconductor. ?typica l? parameters which may be provided in on semiconductor data sheets and/or speci?cations can and do vary in diffe rent applications and actual performance may vary over time. all operat ing parameters, including ?typicals? must be validated for each custo mer application by customer?s technical experts. on semiconductor does not convey any license und er its patent rights nor the rights of others. on semiconductor products a re not designed, intended, or authorized for use as a critical compone nt in life support systems or any fda class 3 medical devices or medical devices with a same or similar classi?ca tion in a foreign jurisdiction or any devices intended for implantation i n the human body. should buyer purchase or use on semiconductor products fo r any such unintended or unauthorized application, buyer shall indemnify and hold on semico nductor and its of?cers, employees, subsidiaries, af?liates, and di stributors harmless against all claims, costs, damages, and expense s, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associa ted with such unintended or unauthorized use, even if such claim alleges th at on semiconductor was negligent regarding the design or manufacture o f the part. on semiconductor is an equal opportunity/af?rmative action employer. this literatu re is subject to all applicable copyright laws and is not for resale in any manne r.
74LVX02 low voltage quad 2-input nor gate ?1993 fairchild semiconductor corporation www.fairchildsemi.com 74LVX02 rev. 1.4.0 february 2008 74LVX02low voltage quad 2-input nor gate features input voltage level translation from 5v to 3v ideal for low power/low noise 3.3v applications guaranteed simultaneous switching noise level and dynamic threshold performance general description the lvx02 contains four 2-input nor gates. the inputstolerate voltages up to 7v allowing the interface of 5v systems to 3v systems. ordering information device also available in tape and reel. specify by appending suffix letter x to the ordering number. all packages are lead free per jedec: j-std-020b standard. connection diagrampin description logic symbol ieee/iec order number package number package description 74LVX02m m14a 14-lead small outline integrated circuit (soic), jedec ms-012, 0.150" narrow 74LVX02sj m14d 14-lead small outline package (sop), eiaj type ii, 5.3mm wide 74LVX02mtc mtc14 14-lead thin shrink small outline package (tssop), jedec mo-153, 4.4mm wide pin names description a n , b n inputs o n outputs
?1993 fairchild semiconductor corporation www.fairchildsemi.com 74LVX02 rev. 1.4.0 2 74LVX02 low voltage quad 2-input nor gate absolute maximum ratings stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. recommended operating conditions (1) the recommended operating conditions table defines the conditions for actual device operation. recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. fairchild does not recommend exceeding them or designing to absolute maximum ratings. note: 1. unused inputs must be held high or low. they may not float. symbol parameter rating v cc supply voltage C0.5v to +7.0v i ik dc input diode current, v i = C0.5v C20ma v i dc input voltage C0.5v to 7v i ok dc output diode current v o = C0.5v C20ma v o = v cc + 0.5v +20ma v o dc output voltage C0.5v to v cc + 0.5v i o dc output source or sink current 25ma i cc or i gnd dc v cc or ground current 50ma t stg storage temperature C65c to +150c pp ow er dissipation 180mw symbol parameter rating v cc supply voltage 2.0v to 3.6v v i input voltage 0v to 5.5v v o output voltage 0v to v cc t a operating temperature C40c to +85c ? t / ? v input rise and fall time 0ns/v to 100ns/v
?1993 fairchild semiconductor corporation www.fairchildsemi.com 74LVX02 rev. 1.4.0 3 74LVX02 low voltage quad 2-input nor gate dc electrical characteristicsnoise characteristics (2) note: 2. input t r = t f = 3ns symbol parameter v cc conditions t a = +25c t a = C40c to +85c units min. typ. max. min. max. v ih high level input voltage 2.0 1.5 1.5 v 3.0 2.0 2.0 3.6 2.4 2.4 v il low level input voltage 2.0 0.5 0.5 v 3.0 0.8 0.8 3.6 0.8 0.8 v oh high level output voltage 2.0 v in = v il or v ih , i oh = C50a 1.9 2.0 1.9 v 3.0 v in = v il or v ih , i oh = C50a 2.9 3.0 2.9 v in = v il or v ih , i oh = C4ma 2.58 2.48 v ol low level output voltage 2.0 v in = v il or v ih , i ol = 50a 0.0 0.1 0.1 v 3.0 v in = v il or v ih , i ol = 50a 0.0 0.1 0.1 v in = v il or v ih , i ol = 4ma 0.36 0.44 i in input leakage current 3.6 v in = 5.5v or gnd 0.1 1.0 a i cc quiescent supply current 3.6 v in = v cc or gnd 2.0 20.0 a symbol parameter v cc (v) c l (pf) t a = 25c units typ. limit v olp quiet output maximum dynamic v ol 3.3 50 0.3 0.5 v v olv quiet output minimum dynamic v ol 3.3 50 C0.3 C0.5 v v ihd minimum high level dynamic input voltage 3.3 50 2.0 v v ild maximum low level dynamic input voltage 3.3 50 0.8 v
?1993 fairchild semiconductor corporation www.fairchildsemi.com 74LVX02 rev. 1.4.0 4 74LVX02 low voltage quad 2-input nor gate ac electrical characteristics note: 3. parameter guaranteed by design t oslh = |t plhm Ct plhn |, t oshl = |t phlm Ct phln | capacitance note: 4. c pd is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.average operating current can be obtained by the eqation: i cc(opr.) = symbol parameter v cc (v) c l (pf) t a = +25c t a = C40c to +85c units min. typ. max. min. max. t plh , t phl propagation delay time 2.7 15 5.9 10.7 1.0 13.5 ns 50 8.4 14.2 1.0 17.0 3.3 0.3 15 4.5 6.6 1.0 8.0 50 7.0 10.1 1.0 11.5 t oslh , t oshl output to output skew (3) 2.7 50 1.5 1.5 ns 3.3 1.5 1.5 symbol parameter t a = +25c t a = C40c to +85c units min. typ. max. min. max. c in input capacitance 4 10 10 pf c pd pow er dissipation capacitance (4) 15 pf c pd v cc f in i cc 4 per gate , () ---------------------------------------------------------
front view top view ? all lead tips notes: a. conforms to jedec registration mo-153, variation ab, ref note 6 b. dimensions are in millimeters. c. dimensions are exclusive of burrs, mold flash, and tie bar extrusions d. dimensioning and tolerances per ansi y14.5m, 2009. e. landpattern standard: sop65p640x110-14m.f. drawing file name: mkt-mtc14rev7. 0.43typ 0.2 c b a 8 1 7 14 a b ? 3.2 6.4 pin#1 ident 1.2 max 0.1 c all lead tips c 0.65 0.300.19 0.13 a b c ? 0.90 +0.15 -0.10 0.200.09 see detail a ? 7 2 3 % 2 7 7 2 0 gage plane 0.25 seating plane 0.09 min 0.09 min ? 1.00 detail a ? ? recommended land pattern 6.10 0.65 1.65 0.45
1.70 5.60 1.27 0.65 1.501.25 1.75 max 0.250.10 c 4.003.80 8.758.50 6.00 (0.33) 0.510.35 7.62 1.27 1 pin #1 ident. a b 0.250.19 a 0.500.25 x 45 r0.10 r0.10 (1.04) 0.36 80 0.900.50 detail a scale 16 : 1 gage plane seating plane top view front view side view 14 7 8 1 7 8 land pattern recommendation notes: a. conforms to jedec ms-012, variation ab, issue c b. all dimensions are in millimeters c. dimensions do not include mold flash or burrs d. land pattern standard: soic127p600x145-14m e. conforms to asme y14.5m, 2009 d. drawing filename: mkt-m14arev14 14 0.10 c 0.25 m c b a
www. onsemi.com 1 on semiconductor and are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries i n the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . a listing of on semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent ? marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does on semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. typical parameters which may be provided in on semiconductor data sheets and/or specifications can and do vary in dif ferent applications and actual performance may vary over time. all operating parameters, including typic als must be validated for each customer application by customers technical experts. on semiconductor does not convey any license under its patent rights nor the right s of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semicondu ctor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its officers, employees, subsidiaries, affiliates, and distrib utors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 www.onsemi.com literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your localsales representative ? semiconductor components industries, llc
|
